Thiago Leão Moreira 13 年之前 Hey Ray, I use to work in a different and IMO more efficient way. I start my Tomcat in a remote debug mode, just call from command line the command: "catalina.sh jpda run" . Then you can connect your Eclipse to Liferay using the "Debug Configurations > Remote Java Application" menu. By default the host and port points to the correct place. You can also disconnect as you wish and continue the normal testing. Give a try and let me know.um abraço! 请登录以投票。 以……回复 取消 Ray Augé Thiago Leão Moreira 13 年之前 I started this way long ago. I dropped it because it caused me to have to editing the tomcat configurations all the time, setting different VM settings, etc. With the method I use, I can duplicate the run config, and change only a few settins, such as adding JMX, or particular GC settings, etc., all without touching the files in the bundle. I can even switch to different installed JVMs configured in Eclipse without having to edit more config, or change the system PATHs or settings. 请登录以投票。 以……回复 取消 Denis Signoretto Ray Augé 13 年之前 @Ray Can you explain step by step your method?Thanks,Denis. 请登录以投票。 以……回复 取消 Ray Augé Denis Signoretto 13 年之前 Besides the configuration above, can you explain a little what "method" you'd like me to clarify? I'm not quite sure what you're asking, but I would like to give a good answer. 请登录以投票。 以……回复 取消 Denis Signoretto Ray Augé 13 年之前 @RayHi ray, you are right I was't really clear. I'm referring to your sentence "With the method I use". I 'm guessing it's the same of Thiago.Thanks,Denis. 请登录以投票。 以……回复 取消 Ray Augé Denis Signoretto 13 年之前 Got it! I simply meant "the method that I described above in the blog post". 请登录以投票。 以……回复 取消
Ray Augé Thiago Leão Moreira 13 年之前 I started this way long ago. I dropped it because it caused me to have to editing the tomcat configurations all the time, setting different VM settings, etc. With the method I use, I can duplicate the run config, and change only a few settins, such as adding JMX, or particular GC settings, etc., all without touching the files in the bundle. I can even switch to different installed JVMs configured in Eclipse without having to edit more config, or change the system PATHs or settings. 请登录以投票。 以……回复 取消 Denis Signoretto Ray Augé 13 年之前 @Ray Can you explain step by step your method?Thanks,Denis. 请登录以投票。 以……回复 取消 Ray Augé Denis Signoretto 13 年之前 Besides the configuration above, can you explain a little what "method" you'd like me to clarify? I'm not quite sure what you're asking, but I would like to give a good answer. 请登录以投票。 以……回复 取消 Denis Signoretto Ray Augé 13 年之前 @RayHi ray, you are right I was't really clear. I'm referring to your sentence "With the method I use". I 'm guessing it's the same of Thiago.Thanks,Denis. 请登录以投票。 以……回复 取消 Ray Augé Denis Signoretto 13 年之前 Got it! I simply meant "the method that I described above in the blog post". 请登录以投票。 以……回复 取消
Denis Signoretto Ray Augé 13 年之前 @Ray Can you explain step by step your method?Thanks,Denis. 请登录以投票。 以……回复 取消 Ray Augé Denis Signoretto 13 年之前 Besides the configuration above, can you explain a little what "method" you'd like me to clarify? I'm not quite sure what you're asking, but I would like to give a good answer. 请登录以投票。 以……回复 取消 Denis Signoretto Ray Augé 13 年之前 @RayHi ray, you are right I was't really clear. I'm referring to your sentence "With the method I use". I 'm guessing it's the same of Thiago.Thanks,Denis. 请登录以投票。 以……回复 取消 Ray Augé Denis Signoretto 13 年之前 Got it! I simply meant "the method that I described above in the blog post". 请登录以投票。 以……回复 取消
Ray Augé Denis Signoretto 13 年之前 Besides the configuration above, can you explain a little what "method" you'd like me to clarify? I'm not quite sure what you're asking, but I would like to give a good answer. 请登录以投票。 以……回复 取消 Denis Signoretto Ray Augé 13 年之前 @RayHi ray, you are right I was't really clear. I'm referring to your sentence "With the method I use". I 'm guessing it's the same of Thiago.Thanks,Denis. 请登录以投票。 以……回复 取消 Ray Augé Denis Signoretto 13 年之前 Got it! I simply meant "the method that I described above in the blog post". 请登录以投票。 以……回复 取消
Denis Signoretto Ray Augé 13 年之前 @RayHi ray, you are right I was't really clear. I'm referring to your sentence "With the method I use". I 'm guessing it's the same of Thiago.Thanks,Denis. 请登录以投票。 以……回复 取消 Ray Augé Denis Signoretto 13 年之前 Got it! I simply meant "the method that I described above in the blog post". 请登录以投票。 以……回复 取消
Ray Augé Denis Signoretto 13 年之前 Got it! I simply meant "the method that I described above in the blog post". 请登录以投票。 以……回复 取消
Vilmos Kozma 13 年之前 Hi Ray!It's good to see this stuff written down. However, for the whole picture it would be nice to hear about hot code replacement. When I debug my code and find something to be fixed I like not having to run any build script to test the new code. So is the above description solves this issue or we need to do some extra work to get the JVM to hot code replace? 请登录以投票。 以……回复 取消 Ray Augé Vilmos Kozma 13 年之前 You can do hot code replacement using this technique. There is of course the limitation of the (Sun) JVM, which does not allow new|changes to the class's public signature.Oh, and the project does have to be listed in the sources tab of the run configuration. 请登录以投票。 以……回复 取消 Corné Aussems Ray Augé 13 年之前 How should i hot-code replace classes? I know there is deploy-fast for jsps and deploy.properties. 请登录以投票。 以……回复 取消 Ray Augé Corné Aussems 13 年之前 Eclipse should do it automatically. Of course you can't add new methods, but changes should be pushed automatically as soon as you save, while in debug.Just make sure to include their path to the jsp java source in the run configuration (that is in the "work" folder, [tc]/work/Catalina/localhost/*/). 请登录以投票。 以……回复 取消 Ray Augé Ray Augé 13 年之前 Oh, as I learned the hard way last week, jsp pre-compile breaks the ability to debug them, so don't do that. They have to be compiled inside the debugged JVM. I even tried pre-compiling them with debug flags added, but it still didn't work. Anyone with insight in that please let me know. 请登录以投票。 以……回复 取消
Ray Augé Vilmos Kozma 13 年之前 You can do hot code replacement using this technique. There is of course the limitation of the (Sun) JVM, which does not allow new|changes to the class's public signature.Oh, and the project does have to be listed in the sources tab of the run configuration. 请登录以投票。 以……回复 取消 Corné Aussems Ray Augé 13 年之前 How should i hot-code replace classes? I know there is deploy-fast for jsps and deploy.properties. 请登录以投票。 以……回复 取消 Ray Augé Corné Aussems 13 年之前 Eclipse should do it automatically. Of course you can't add new methods, but changes should be pushed automatically as soon as you save, while in debug.Just make sure to include their path to the jsp java source in the run configuration (that is in the "work" folder, [tc]/work/Catalina/localhost/*/). 请登录以投票。 以……回复 取消 Ray Augé Ray Augé 13 年之前 Oh, as I learned the hard way last week, jsp pre-compile breaks the ability to debug them, so don't do that. They have to be compiled inside the debugged JVM. I even tried pre-compiling them with debug flags added, but it still didn't work. Anyone with insight in that please let me know. 请登录以投票。 以……回复 取消
Corné Aussems Ray Augé 13 年之前 How should i hot-code replace classes? I know there is deploy-fast for jsps and deploy.properties. 请登录以投票。 以……回复 取消 Ray Augé Corné Aussems 13 年之前 Eclipse should do it automatically. Of course you can't add new methods, but changes should be pushed automatically as soon as you save, while in debug.Just make sure to include their path to the jsp java source in the run configuration (that is in the "work" folder, [tc]/work/Catalina/localhost/*/). 请登录以投票。 以……回复 取消 Ray Augé Ray Augé 13 年之前 Oh, as I learned the hard way last week, jsp pre-compile breaks the ability to debug them, so don't do that. They have to be compiled inside the debugged JVM. I even tried pre-compiling them with debug flags added, but it still didn't work. Anyone with insight in that please let me know. 请登录以投票。 以……回复 取消
Ray Augé Corné Aussems 13 年之前 Eclipse should do it automatically. Of course you can't add new methods, but changes should be pushed automatically as soon as you save, while in debug.Just make sure to include their path to the jsp java source in the run configuration (that is in the "work" folder, [tc]/work/Catalina/localhost/*/). 请登录以投票。 以……回复 取消 Ray Augé Ray Augé 13 年之前 Oh, as I learned the hard way last week, jsp pre-compile breaks the ability to debug them, so don't do that. They have to be compiled inside the debugged JVM. I even tried pre-compiling them with debug flags added, but it still didn't work. Anyone with insight in that please let me know. 请登录以投票。 以……回复 取消
Ray Augé Ray Augé 13 年之前 Oh, as I learned the hard way last week, jsp pre-compile breaks the ability to debug them, so don't do that. They have to be compiled inside the debugged JVM. I even tried pre-compiling them with debug flags added, but it still didn't work. Anyone with insight in that please let me know. 请登录以投票。 以……回复 取消
Daniel Niklas 13 年之前 Hi,you can combine your ideas. Extend VM arguments to-Xdebug -Xrunjdwp:transport=dt_socket,address=8000,server=y,suspend=nSo you get the advantages metioned by Ray and you can use "Remote Debugging" as Thiago has described. Daniel :-) 请登录以投票。 以……回复 取消
Its Me 13 年之前 Since I can't see my portlet on the website, it isn't deployed to the server? How can i do this in eclipse? 请登录以投票。 以……回复 取消
Corné Aussems 13 年之前 I just found out by trial that when in the Servers View you add a Tomcat Server or Liferay Server (IDE/Studio) and point it to your newly build bundle and just under Open launch configuration >> Source >> Add : Java Project >> The portal project. Start in debug and voila.. 请登录以投票。 以……回复 取消 Michel Wicky Corné Aussems 12 年之前 Just testing and got an error using helios SR2Variable references non-exitent resource: ${workspace_loc:portal} 请登录以投票。 以……回复 取消 Ray Augé Michel Wicky 12 年之前 You still seeing this? I wonder if eclipse changed the default variable names! 请登录以投票。 以……回复 取消 Ray Augé Ray Augé 12 年之前 I updated it to just say ${workspace_loc:<NAME_OF_YOUR_ECLIPSE_PROJECT>}Replace that token with whatever is the name of your eclipse project. OR just replace that entire variable with the absolute path to your project. 请登录以投票。 以……回复 取消
Michel Wicky Corné Aussems 12 年之前 Just testing and got an error using helios SR2Variable references non-exitent resource: ${workspace_loc:portal} 请登录以投票。 以……回复 取消 Ray Augé Michel Wicky 12 年之前 You still seeing this? I wonder if eclipse changed the default variable names! 请登录以投票。 以……回复 取消 Ray Augé Ray Augé 12 年之前 I updated it to just say ${workspace_loc:<NAME_OF_YOUR_ECLIPSE_PROJECT>}Replace that token with whatever is the name of your eclipse project. OR just replace that entire variable with the absolute path to your project. 请登录以投票。 以……回复 取消
Ray Augé Michel Wicky 12 年之前 You still seeing this? I wonder if eclipse changed the default variable names! 请登录以投票。 以……回复 取消 Ray Augé Ray Augé 12 年之前 I updated it to just say ${workspace_loc:<NAME_OF_YOUR_ECLIPSE_PROJECT>}Replace that token with whatever is the name of your eclipse project. OR just replace that entire variable with the absolute path to your project. 请登录以投票。 以……回复 取消
Ray Augé Ray Augé 12 年之前 I updated it to just say ${workspace_loc:<NAME_OF_YOUR_ECLIPSE_PROJECT>}Replace that token with whatever is the name of your eclipse project. OR just replace that entire variable with the absolute path to your project. 请登录以投票。 以……回复 取消
babu reddy 12 年之前 hi sir. pls tel me how to configure liferay with Jboss to eclips 请登录以投票。 以……回复 取消 Ray Augé babu reddy 12 年之前 - 编辑过的 I would do basically the same thing as above and get the start command used by jboss, and setup the run config something like this:http://i.imgur.com/Gjqyv.pnghttp://i.imgur.com/joTTR.pnghttp://i.imgur.com/m8mY5.pnghttp://i.imgur.com/6wZTX.pngNote the ${JBOSS_510_DEPLOY} Eclipse variable points to the JBoss install location. 请登录以投票。 以……回复 取消
Ray Augé babu reddy 12 年之前 - 编辑过的 I would do basically the same thing as above and get the start command used by jboss, and setup the run config something like this:http://i.imgur.com/Gjqyv.pnghttp://i.imgur.com/joTTR.pnghttp://i.imgur.com/m8mY5.pnghttp://i.imgur.com/6wZTX.pngNote the ${JBOSS_510_DEPLOY} Eclipse variable points to the JBoss install location. 请登录以投票。 以……回复 取消
Linus Sphinx 12 年之前 Creating my project of, 'portal', with the, "Create from ant build file", option, all works, see the app, create the run configuration and fire it up just fine but I don't see any source to step through, just all the jars. How do you create your project in eclipse? 请登录以投票。 以……回复 取消 Mary Mizrahi Linus Sphinx 11 年之前 Does this method of debugging in Eclipse no longer work with 6.1 and IDE 1.52?For some reason I no longer get output to the console from my portlets and break points are ignored. 请登录以投票。 以……回复 取消 Ray Augé Mary Mizrahi 11 年之前 I have no idea with respect to the IDE, but I still use this same technique with 6.1 and trunk. Have you included the plugin projects in the sources list of the debug configuration? 请登录以投票。 以……回复 取消 Jacques Traore Ray Augé 11 年之前 You are a genius !!!!Thx 请登录以投票。 以……回复 取消
Mary Mizrahi Linus Sphinx 11 年之前 Does this method of debugging in Eclipse no longer work with 6.1 and IDE 1.52?For some reason I no longer get output to the console from my portlets and break points are ignored. 请登录以投票。 以……回复 取消 Ray Augé Mary Mizrahi 11 年之前 I have no idea with respect to the IDE, but I still use this same technique with 6.1 and trunk. Have you included the plugin projects in the sources list of the debug configuration? 请登录以投票。 以……回复 取消 Jacques Traore Ray Augé 11 年之前 You are a genius !!!!Thx 请登录以投票。 以……回复 取消
Ray Augé Mary Mizrahi 11 年之前 I have no idea with respect to the IDE, but I still use this same technique with 6.1 and trunk. Have you included the plugin projects in the sources list of the debug configuration? 请登录以投票。 以……回复 取消 Jacques Traore Ray Augé 11 年之前 You are a genius !!!!Thx 请登录以投票。 以……回复 取消
hiep lq 10 年之前 this method is debug for portlet, theme, ext, hook project?when i use liferay. I use web-content and cms script. my code find service is return nothing. i want debug into serviceLocator.findService.howto setup enviroment for debug portal code? 请登录以投票。 以……回复 取消 Ray Augé hiep lq 10 年之前 This method works for the portal, but you need the source to make it useful. 请登录以投票。 以……回复 取消
Ray Augé hiep lq 10 年之前 This method works for the portal, but you need the source to make it useful. 请登录以投票。 以……回复 取消