Thiago Leão Moreira Hace 13 años Hey Ray, I use to work in a different and IMO more efficient way. I start my Tomcat in a remote debug mode, just call from command line the command: "catalina.sh jpda run" . Then you can connect your Eclipse to Liferay using the "Debug Configurations > Remote Java Application" menu. By default the host and port points to the correct place. You can also disconnect as you wish and continue the normal testing. Give a try and let me know.um abraço! Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Thiago Leão Moreira Hace 13 años I started this way long ago. I dropped it because it caused me to have to editing the tomcat configurations all the time, setting different VM settings, etc. With the method I use, I can duplicate the run config, and change only a few settins, such as adding JMX, or particular GC settings, etc., all without touching the files in the bundle. I can even switch to different installed JVMs configured in Eclipse without having to edit more config, or change the system PATHs or settings. Por favor identifíquese para votar. Contestar como... Cancelar Denis Signoretto Ray Augé Hace 13 años @Ray Can you explain step by step your method?Thanks,Denis. Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Denis Signoretto Hace 13 años Besides the configuration above, can you explain a little what "method" you'd like me to clarify? I'm not quite sure what you're asking, but I would like to give a good answer. Por favor identifíquese para votar. Contestar como... Cancelar Denis Signoretto Ray Augé Hace 13 años @RayHi ray, you are right I was't really clear. I'm referring to your sentence "With the method I use". I 'm guessing it's the same of Thiago.Thanks,Denis. Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Denis Signoretto Hace 13 años Got it! I simply meant "the method that I described above in the blog post". Por favor identifíquese para votar. Contestar como... Cancelar
Ray Augé Thiago Leão Moreira Hace 13 años I started this way long ago. I dropped it because it caused me to have to editing the tomcat configurations all the time, setting different VM settings, etc. With the method I use, I can duplicate the run config, and change only a few settins, such as adding JMX, or particular GC settings, etc., all without touching the files in the bundle. I can even switch to different installed JVMs configured in Eclipse without having to edit more config, or change the system PATHs or settings. Por favor identifíquese para votar. Contestar como... Cancelar Denis Signoretto Ray Augé Hace 13 años @Ray Can you explain step by step your method?Thanks,Denis. Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Denis Signoretto Hace 13 años Besides the configuration above, can you explain a little what "method" you'd like me to clarify? I'm not quite sure what you're asking, but I would like to give a good answer. Por favor identifíquese para votar. Contestar como... Cancelar Denis Signoretto Ray Augé Hace 13 años @RayHi ray, you are right I was't really clear. I'm referring to your sentence "With the method I use". I 'm guessing it's the same of Thiago.Thanks,Denis. Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Denis Signoretto Hace 13 años Got it! I simply meant "the method that I described above in the blog post". Por favor identifíquese para votar. Contestar como... Cancelar
Denis Signoretto Ray Augé Hace 13 años @Ray Can you explain step by step your method?Thanks,Denis. Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Denis Signoretto Hace 13 años Besides the configuration above, can you explain a little what "method" you'd like me to clarify? I'm not quite sure what you're asking, but I would like to give a good answer. Por favor identifíquese para votar. Contestar como... Cancelar Denis Signoretto Ray Augé Hace 13 años @RayHi ray, you are right I was't really clear. I'm referring to your sentence "With the method I use". I 'm guessing it's the same of Thiago.Thanks,Denis. Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Denis Signoretto Hace 13 años Got it! I simply meant "the method that I described above in the blog post". Por favor identifíquese para votar. Contestar como... Cancelar
Ray Augé Denis Signoretto Hace 13 años Besides the configuration above, can you explain a little what "method" you'd like me to clarify? I'm not quite sure what you're asking, but I would like to give a good answer. Por favor identifíquese para votar. Contestar como... Cancelar Denis Signoretto Ray Augé Hace 13 años @RayHi ray, you are right I was't really clear. I'm referring to your sentence "With the method I use". I 'm guessing it's the same of Thiago.Thanks,Denis. Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Denis Signoretto Hace 13 años Got it! I simply meant "the method that I described above in the blog post". Por favor identifíquese para votar. Contestar como... Cancelar
Denis Signoretto Ray Augé Hace 13 años @RayHi ray, you are right I was't really clear. I'm referring to your sentence "With the method I use". I 'm guessing it's the same of Thiago.Thanks,Denis. Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Denis Signoretto Hace 13 años Got it! I simply meant "the method that I described above in the blog post". Por favor identifíquese para votar. Contestar como... Cancelar
Ray Augé Denis Signoretto Hace 13 años Got it! I simply meant "the method that I described above in the blog post". Por favor identifíquese para votar. Contestar como... Cancelar
Jonas X. Yuan Hace 13 años nice post! Thank you, Ray Por favor identifíquese para votar. Contestar como... Cancelar
Vilmos Kozma Hace 13 años Hi Ray!It's good to see this stuff written down. However, for the whole picture it would be nice to hear about hot code replacement. When I debug my code and find something to be fixed I like not having to run any build script to test the new code. So is the above description solves this issue or we need to do some extra work to get the JVM to hot code replace? Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Vilmos Kozma Hace 13 años You can do hot code replacement using this technique. There is of course the limitation of the (Sun) JVM, which does not allow new|changes to the class's public signature.Oh, and the project does have to be listed in the sources tab of the run configuration. Por favor identifíquese para votar. Contestar como... Cancelar Corné Aussems Ray Augé Hace 13 años How should i hot-code replace classes? I know there is deploy-fast for jsps and deploy.properties. Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Corné Aussems Hace 13 años Eclipse should do it automatically. Of course you can't add new methods, but changes should be pushed automatically as soon as you save, while in debug.Just make sure to include their path to the jsp java source in the run configuration (that is in the "work" folder, [tc]/work/Catalina/localhost/*/). Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Ray Augé Hace 13 años Oh, as I learned the hard way last week, jsp pre-compile breaks the ability to debug them, so don't do that. They have to be compiled inside the debugged JVM. I even tried pre-compiling them with debug flags added, but it still didn't work. Anyone with insight in that please let me know. Por favor identifíquese para votar. Contestar como... Cancelar
Ray Augé Vilmos Kozma Hace 13 años You can do hot code replacement using this technique. There is of course the limitation of the (Sun) JVM, which does not allow new|changes to the class's public signature.Oh, and the project does have to be listed in the sources tab of the run configuration. Por favor identifíquese para votar. Contestar como... Cancelar Corné Aussems Ray Augé Hace 13 años How should i hot-code replace classes? I know there is deploy-fast for jsps and deploy.properties. Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Corné Aussems Hace 13 años Eclipse should do it automatically. Of course you can't add new methods, but changes should be pushed automatically as soon as you save, while in debug.Just make sure to include their path to the jsp java source in the run configuration (that is in the "work" folder, [tc]/work/Catalina/localhost/*/). Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Ray Augé Hace 13 años Oh, as I learned the hard way last week, jsp pre-compile breaks the ability to debug them, so don't do that. They have to be compiled inside the debugged JVM. I even tried pre-compiling them with debug flags added, but it still didn't work. Anyone with insight in that please let me know. Por favor identifíquese para votar. Contestar como... Cancelar
Corné Aussems Ray Augé Hace 13 años How should i hot-code replace classes? I know there is deploy-fast for jsps and deploy.properties. Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Corné Aussems Hace 13 años Eclipse should do it automatically. Of course you can't add new methods, but changes should be pushed automatically as soon as you save, while in debug.Just make sure to include their path to the jsp java source in the run configuration (that is in the "work" folder, [tc]/work/Catalina/localhost/*/). Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Ray Augé Hace 13 años Oh, as I learned the hard way last week, jsp pre-compile breaks the ability to debug them, so don't do that. They have to be compiled inside the debugged JVM. I even tried pre-compiling them with debug flags added, but it still didn't work. Anyone with insight in that please let me know. Por favor identifíquese para votar. Contestar como... Cancelar
Ray Augé Corné Aussems Hace 13 años Eclipse should do it automatically. Of course you can't add new methods, but changes should be pushed automatically as soon as you save, while in debug.Just make sure to include their path to the jsp java source in the run configuration (that is in the "work" folder, [tc]/work/Catalina/localhost/*/). Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Ray Augé Hace 13 años Oh, as I learned the hard way last week, jsp pre-compile breaks the ability to debug them, so don't do that. They have to be compiled inside the debugged JVM. I even tried pre-compiling them with debug flags added, but it still didn't work. Anyone with insight in that please let me know. Por favor identifíquese para votar. Contestar como... Cancelar
Ray Augé Ray Augé Hace 13 años Oh, as I learned the hard way last week, jsp pre-compile breaks the ability to debug them, so don't do that. They have to be compiled inside the debugged JVM. I even tried pre-compiling them with debug flags added, but it still didn't work. Anyone with insight in that please let me know. Por favor identifíquese para votar. Contestar como... Cancelar
Daniel Niklas Hace 13 años Hi,you can combine your ideas. Extend VM arguments to-Xdebug -Xrunjdwp:transport=dt_socket,address=8000,server=y,suspend=nSo you get the advantages metioned by Ray and you can use "Remote Debugging" as Thiago has described. Daniel :-) Por favor identifíquese para votar. Contestar como... Cancelar
Tamas Imrei Hace 13 años It works GREAT! Thanks! Por favor identifíquese para votar. Contestar como... Cancelar
Its Me Hace 13 años Since I can't see my portlet on the website, it isn't deployed to the server? How can i do this in eclipse? Por favor identifíquese para votar. Contestar como... Cancelar
Corné Aussems Hace 13 años I just found out by trial that when in the Servers View you add a Tomcat Server or Liferay Server (IDE/Studio) and point it to your newly build bundle and just under Open launch configuration >> Source >> Add : Java Project >> The portal project. Start in debug and voila.. Por favor identifíquese para votar. Contestar como... Cancelar Michel Wicky Corné Aussems Hace 12 años Just testing and got an error using helios SR2Variable references non-exitent resource: ${workspace_loc:portal} Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Michel Wicky Hace 12 años You still seeing this? I wonder if eclipse changed the default variable names! Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Ray Augé Hace 12 años I updated it to just say ${workspace_loc:<NAME_OF_YOUR_ECLIPSE_PROJECT>}Replace that token with whatever is the name of your eclipse project. OR just replace that entire variable with the absolute path to your project. Por favor identifíquese para votar. Contestar como... Cancelar
Michel Wicky Corné Aussems Hace 12 años Just testing and got an error using helios SR2Variable references non-exitent resource: ${workspace_loc:portal} Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Michel Wicky Hace 12 años You still seeing this? I wonder if eclipse changed the default variable names! Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Ray Augé Hace 12 años I updated it to just say ${workspace_loc:<NAME_OF_YOUR_ECLIPSE_PROJECT>}Replace that token with whatever is the name of your eclipse project. OR just replace that entire variable with the absolute path to your project. Por favor identifíquese para votar. Contestar como... Cancelar
Ray Augé Michel Wicky Hace 12 años You still seeing this? I wonder if eclipse changed the default variable names! Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Ray Augé Hace 12 años I updated it to just say ${workspace_loc:<NAME_OF_YOUR_ECLIPSE_PROJECT>}Replace that token with whatever is the name of your eclipse project. OR just replace that entire variable with the absolute path to your project. Por favor identifíquese para votar. Contestar como... Cancelar
Ray Augé Ray Augé Hace 12 años I updated it to just say ${workspace_loc:<NAME_OF_YOUR_ECLIPSE_PROJECT>}Replace that token with whatever is the name of your eclipse project. OR just replace that entire variable with the absolute path to your project. Por favor identifíquese para votar. Contestar como... Cancelar
babu reddy Hace 12 años hi sir. pls tel me how to configure liferay with Jboss to eclips Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé babu reddy Hace 12 años - Editado I would do basically the same thing as above and get the start command used by jboss, and setup the run config something like this:http://i.imgur.com/Gjqyv.pnghttp://i.imgur.com/joTTR.pnghttp://i.imgur.com/m8mY5.pnghttp://i.imgur.com/6wZTX.pngNote the ${JBOSS_510_DEPLOY} Eclipse variable points to the JBoss install location. Por favor identifíquese para votar. Contestar como... Cancelar
Ray Augé babu reddy Hace 12 años - Editado I would do basically the same thing as above and get the start command used by jboss, and setup the run config something like this:http://i.imgur.com/Gjqyv.pnghttp://i.imgur.com/joTTR.pnghttp://i.imgur.com/m8mY5.pnghttp://i.imgur.com/6wZTX.pngNote the ${JBOSS_510_DEPLOY} Eclipse variable points to the JBoss install location. Por favor identifíquese para votar. Contestar como... Cancelar
Linus Sphinx Hace 12 años Creating my project of, 'portal', with the, "Create from ant build file", option, all works, see the app, create the run configuration and fire it up just fine but I don't see any source to step through, just all the jars. How do you create your project in eclipse? Por favor identifíquese para votar. Contestar como... Cancelar Mary Mizrahi Linus Sphinx Hace 11 años Does this method of debugging in Eclipse no longer work with 6.1 and IDE 1.52?For some reason I no longer get output to the console from my portlets and break points are ignored. Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Mary Mizrahi Hace 11 años I have no idea with respect to the IDE, but I still use this same technique with 6.1 and trunk. Have you included the plugin projects in the sources list of the debug configuration? Por favor identifíquese para votar. Contestar como... Cancelar Jacques Traore Ray Augé Hace 11 años You are a genius !!!!Thx Por favor identifíquese para votar. Contestar como... Cancelar
Mary Mizrahi Linus Sphinx Hace 11 años Does this method of debugging in Eclipse no longer work with 6.1 and IDE 1.52?For some reason I no longer get output to the console from my portlets and break points are ignored. Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé Mary Mizrahi Hace 11 años I have no idea with respect to the IDE, but I still use this same technique with 6.1 and trunk. Have you included the plugin projects in the sources list of the debug configuration? Por favor identifíquese para votar. Contestar como... Cancelar Jacques Traore Ray Augé Hace 11 años You are a genius !!!!Thx Por favor identifíquese para votar. Contestar como... Cancelar
Ray Augé Mary Mizrahi Hace 11 años I have no idea with respect to the IDE, but I still use this same technique with 6.1 and trunk. Have you included the plugin projects in the sources list of the debug configuration? Por favor identifíquese para votar. Contestar como... Cancelar Jacques Traore Ray Augé Hace 11 años You are a genius !!!!Thx Por favor identifíquese para votar. Contestar como... Cancelar
Jacques Traore Ray Augé Hace 11 años You are a genius !!!!Thx Por favor identifíquese para votar. Contestar como... Cancelar
hiep lq Hace 10 años this method is debug for portlet, theme, ext, hook project?when i use liferay. I use web-content and cms script. my code find service is return nothing. i want debug into serviceLocator.findService.howto setup enviroment for debug portal code? Por favor identifíquese para votar. Contestar como... Cancelar Ray Augé hiep lq Hace 10 años This method works for the portal, but you need the source to make it useful. Por favor identifíquese para votar. Contestar como... Cancelar
Ray Augé hiep lq Hace 10 años This method works for the portal, but you need the source to make it useful. Por favor identifíquese para votar. Contestar como... Cancelar