Foren
EMAIL POP3
Geert REMAUT, geändert vor 13 Jahren.
EMAIL POP3
New Member Beiträge: 16 Beitrittsdatum: 04.04.11 Neueste Beiträge
Hello,
I tested the email configuration and adapted it following your instructions.
Have some questons :
- if i adapt the properties file, i only can do this for 1 emailadres
- i adapted the properties file, but how do i configure the emailsetting in SO ? how do i get the emails in SO ?
Doesn't work !
Geert
I tested the email configuration and adapted it following your instructions.
Have some questons :
- if i adapt the properties file, i only can do this for 1 emailadres
- i adapted the properties file, but how do i configure the emailsetting in SO ? how do i get the emails in SO ?
Doesn't work !
Geert
Ryan Park, geändert vor 13 Jahren.
RE: EMAIL POP3
Regular Member Beiträge: 120 Beitrittsdatum: 28.08.07 Neueste Beiträge
Hi Geert,
Are you trying to use Mail (located in the navigation after login) or trying to configure out-bound email from Social Office for notifications?
-Ryan
Are you trying to use Mail (located in the navigation after login) or trying to configure out-bound email from Social Office for notifications?
-Ryan
Hitoshi Ozawa, geändert vor 13 Jahren.
RE: EMAIL POP3
Liferay Legend Beiträge: 7942 Beitrittsdatum: 24.03.10 Neueste Beiträge
By setting the email in portal-ext.properties, do you mean the following properties to set emails Liferay portal send to users (such as to notify when an user account has been created)?
mail.session.mail.pop3.host=localhost
mail.session.mail.pop3.password=
mail.session.mail.pop3.port=110
mail.session.mail.pop3.user=
mail.session.mail.smtp.auth=false
mail.session.mail.smtp.host=localhost
mail.session.mail.smtp.password=
mail.session.mail.smtp.port=25
mail.session.mail.smtp.user=
mail.session.mail.store.protocol=pop3
mail.session.mail.transport.protocol=smtp
If you just want to use the mail portlet, you can set the email address from the portlet. Liferay doesn't contain email servers so you have to have a valid email account somewhere (e.g. gmail).
From the menu do the following on each user's private page:
1. Add - Collaboration - Mail (or Mail - Vaadin)
2. "Add Mail Account"
mail.session.mail.pop3.host=localhost
mail.session.mail.pop3.password=
mail.session.mail.pop3.port=110
mail.session.mail.pop3.user=
mail.session.mail.smtp.auth=false
mail.session.mail.smtp.host=localhost
mail.session.mail.smtp.password=
mail.session.mail.smtp.port=25
mail.session.mail.smtp.user=
mail.session.mail.store.protocol=pop3
mail.session.mail.transport.protocol=smtp
If you just want to use the mail portlet, you can set the email address from the portlet. Liferay doesn't contain email servers so you have to have a valid email account somewhere (e.g. gmail).
From the menu do the following on each user's private page:
1. Add - Collaboration - Mail (or Mail - Vaadin)
2. "Add Mail Account"
Geert REMAUT, geändert vor 13 Jahren.
RE: EMAIL POP3
New Member Beiträge: 16 Beitrittsdatum: 04.04.11 Neueste Beiträge
So doesn't work with exchange ?
Pitty.
Pitty.
Bryan Cheung, geändert vor 13 Jahren.
RE: EMAIL POP3
Expert Beiträge: 373 Beitrittsdatum: 27.08.04 Neueste Beiträge
Geert,
What exactly would you like to be able to do?
What exactly would you like to be able to do?
Geert REMAUT, geändert vor 13 Jahren.
RE: EMAIL POP3
New Member Beiträge: 16 Beitrittsdatum: 04.04.11 Neueste Beiträge
WE HAVE 5 USERS
EACH DIFFERENT EMAILADRES
I USE EXCHANGE AND POP3
HOW DO I GET EMAIL IN LIFERAY ?
EACH DIFFERENT EMAILADRES
I USE EXCHANGE AND POP3
HOW DO I GET EMAIL IN LIFERAY ?
Ryan Park, geändert vor 13 Jahren.
RE: EMAIL POP3
Regular Member Beiträge: 120 Beitrittsdatum: 28.08.07 Neueste Beiträge
Hi Geert,
At this time we only support the IMAP protocol for email.
Best, Ryan
At this time we only support the IMAP protocol for email.
Best, Ryan
Geert REMAUT, geändert vor 13 Jahren.
RE: EMAIL POP3
New Member Beiträge: 16 Beitrittsdatum: 04.04.11 Neueste Beiträge
Do you have another solution ?
Adapting javamail works only for 1 emailadres.
Adapting javamail works only for 1 emailadres.
Franklin Moses, geändert vor 11 Jahren.
RE: EMAIL POP3
New Member Beiträge: 6 Beitrittsdatum: 09.12.11 Neueste Beiträge
Hi I was having the same error with the following when trying to setup an IMAP account:
You have failed to connect to the imap server but successfully connected to the smtp
I did a little searching and came across this thread:
http://www.liferay.com/community/forums/-/message_boards/message/4037398?_19_redirect=http%3A%2F%2Fwww.liferay.com%2Fcommunity%2Fforums%2F-%2Fmessage_boards%2Fsearch%3F_19_keywords%3Dimap%26_19_searchCategoryId%3D0%26_19_breadcrumbsCategoryId%3D0%26_19_redirect%3Dhttp%253A%252F%252Fwww.liferay.com%252Fcommunity%252Fforums%253Fp_p_id%253D19%2526p_p_lifecycle%253D0%2526p_p_state%253Dnormal%2526p_p_mode%253Dview%2526p_p_col_id%253Dcolumn-1%2526p_p_col_count%253D1
So I added the following lines to the portal ext files
mail.session.mail.imap.host="<mydomain>"
mail.session.mail.imap.port="143"
mail.session.mail.imap.password="<mypw>"
mail.session.mail.imap.user="admin@<mydomain>"
mail.session.mail.store.protocol="imap"
After I did this I was able to add an e-mail account for the admin in SO, but when I was having a few users add their accounts I got the same error again:
You have failed to connect to the imap server but successfully connected to the smtp
The admin e-mail is working perfectly, but I can't seem to figure out why it's not working for all the users? How would I correct this, or do I need to change my portal ext file?
You have failed to connect to the imap server but successfully connected to the smtp
I did a little searching and came across this thread:
http://www.liferay.com/community/forums/-/message_boards/message/4037398?_19_redirect=http%3A%2F%2Fwww.liferay.com%2Fcommunity%2Fforums%2F-%2Fmessage_boards%2Fsearch%3F_19_keywords%3Dimap%26_19_searchCategoryId%3D0%26_19_breadcrumbsCategoryId%3D0%26_19_redirect%3Dhttp%253A%252F%252Fwww.liferay.com%252Fcommunity%252Fforums%253Fp_p_id%253D19%2526p_p_lifecycle%253D0%2526p_p_state%253Dnormal%2526p_p_mode%253Dview%2526p_p_col_id%253Dcolumn-1%2526p_p_col_count%253D1
So I added the following lines to the portal ext files
mail.session.mail.imap.host="<mydomain>"
mail.session.mail.imap.port="143"
mail.session.mail.imap.password="<mypw>"
mail.session.mail.imap.user="admin@<mydomain>"
mail.session.mail.store.protocol="imap"
After I did this I was able to add an e-mail account for the admin in SO, but when I was having a few users add their accounts I got the same error again:
You have failed to connect to the imap server but successfully connected to the smtp
The admin e-mail is working perfectly, but I can't seem to figure out why it's not working for all the users? How would I correct this, or do I need to change my portal ext file?
Franklin Moses, geändert vor 11 Jahren.
RE: EMAIL POP3
New Member Beiträge: 6 Beitrittsdatum: 09.12.11 Neueste Beiträge
I've been able to get the site to register the e-mail addresses. Unfortunately it doesn't seem to be updating, sending or receiving e-mails after the initial setup. During the initial setup it shows the e-mails, but when I try to send from SO, or I send e-mails to the address I don't see the e-mails under SO. It doesn't seem to actively be updating.
This is my settings for the portal-ext.
jdbc.default.driverClassName=org.postgresql.Driver
jdbc.default.url=jdbc:postgresql://localhost:5432/soportal
jdbc.default.username=postgres
jdbc.default.password=xxwwss
mail.session.mail.pop3.host=mail.mydomain.com
mail.session.mail.pop3.password=admin321
mail.session.mail.pop3.port=110
mail.session.mail.pop3.user=administration@mydomain.com
mail.session.mail.smtp.auth=false
mail.session.mail.smtp.host=mail.mydomain.com
mail.session.mail.smtp.password=admin321
mail.session.mail.smtp.port=26
mail.session.mail.smtp.user=administration@mydomain.com
mail.session.mail.store.protocol=pop3
mail.session.mail.transport.protocol=smtp
mail.session.mail.imap.host=mail.mydomain.com
mail.session.mail.imap.port=143
mail.session.mail.imap.password=admin321
mail.session.mail.imap.user=administration@mydomain.com
mail.session.mail.store.protocol=imap
Am I missing something somewhere?
This is my settings for the portal-ext.
jdbc.default.driverClassName=org.postgresql.Driver
jdbc.default.url=jdbc:postgresql://localhost:5432/soportal
jdbc.default.username=postgres
jdbc.default.password=xxwwss
mail.session.mail.pop3.host=mail.mydomain.com
mail.session.mail.pop3.password=admin321
mail.session.mail.pop3.port=110
mail.session.mail.pop3.user=administration@mydomain.com
mail.session.mail.smtp.auth=false
mail.session.mail.smtp.host=mail.mydomain.com
mail.session.mail.smtp.password=admin321
mail.session.mail.smtp.port=26
mail.session.mail.smtp.user=administration@mydomain.com
mail.session.mail.store.protocol=pop3
mail.session.mail.transport.protocol=smtp
mail.session.mail.imap.host=mail.mydomain.com
mail.session.mail.imap.port=143
mail.session.mail.imap.password=admin321
mail.session.mail.imap.user=administration@mydomain.com
mail.session.mail.store.protocol=imap
Am I missing something somewhere?